www.EducationDx.com
This is a FREE information site!
Part of EdDx Educational Series
TV Antenna Amplifiers and Accessories
If you are looking for a

TV antenna preamp

or

distribution amplifier

, you can decide whether to buy at a local store or online.  ALWAYS compare amplifier prices before ordering. You don't have to buy to compare prices and to find out what is included for that priceDon't lose money because you did not check!
EducationDx
    © 2016
Privacy Policy and Disclaimer
Compare Prices!
Check out several sources to compare prices for the best deal, e.g., Internet, local stores.
$
Check for FREE Shipping and Overnight or Fast Shipping if necessary!
Hit the Compare Price button below when you find an amplifier you like or want more information about. Then see if you can match the price.
>>Read the customer reviews of the effectiveness of the product before purchasing!
Preamplifiers
>>
>>

WINEGARD AP-8700 Digital Preamplifier 18 dB Gain Low Noise

-Used to overcome signal loss in coaxial running from antenna to TV
-75 Ohm input/output
-Variable FM trap
-Made of high-impact ABS material
-VHF 17 dB, UHF 19 dB gain

RCA TVPRAMP1R Outdoor Antenna Preamplifier

-Designed specifically to improve the performance of outdoor antennas in low signal strength areas
-Gain: VHF: 16 dB; UHF: 22 dB
-Separate or combined inputs for UHF/VHF
-Switchable FM trap reduces interference from FM frequencies

Preamplifiers

TV Antenna Amplifiers and Accessories

7
<<<Back to 6
>>

Antra AT-PAA28 Low Noise Pre-Amplifier HDTV Pre-amp Signal Booster for UHF VHF Antenna 28dB Adjustable Gain

-Use with HDTV Free Over the Air UHF VHF Outdoor Antenna, covering UHF bands channels 2-69 with FM Trap
-Amplifies weak signals right below the antenna, getting higher Signal/Noise Ratio

Channel Master 3414 4 Outputs Distribution Amplifier

>>
-Four output ports
-7.5db gain per output
-Professional grade performance
-Meets US and international standards
-AC/DC power supply included
>>

Winegard AP8275 Chromstar 2000 Signal Amplifier

-High performance, low noise TV antenna preamplifier
-29 dB VHF, 28 dB UHF
-Amplifies digital signal, Power supply and power injector included
-Built in FM Trap to prevent overload from strong local FM stations
-Gain - 29 dB - 3 dB Noise - VHF, 28 dB - 3 dB Noise - UHF

Channel Master CM-7778 Titan Medium-Gain Mast Mounted Preamplifier

>>
-VHF and UHF 16 dB UHF/VHF/FM amplification
-Single 75 ohm coax Input
-Includes a switchable FM trap
-Outdoor rated housing, Mast Mounted

Winegard AP-2870 Preamplifier Dual Input 19 dB UHF 17 dB VHF

>>
-High performance, low noise TV antenna preamplifier
-Dual inputs for separate VHF and UHF antennas
-17 dB gain average VHF, 19 dB gain average UHF
-Built in FM Trap to prevent overload from strong local FM stations

Winegard HDA-200 Distribution Amplifier Adjustable Gain 5-1000 MHz 24dB

>>
-Amplifies signals from 54-1000 MHz.
-20 dB selectable FM trap
-5-42 MHz 2-way bi-pass at +12 dB gain

Distribution Amplifiers

Distribution Amplifiers

Winegard HDA-100 Distribution Amplifier 5-1000 MHz 15dB

>>
-Amplifies signals from 54-1000 MHz 15dB
-5-42 MHz 2-way bi-pass at -2 dB loss
-Weather resistant housing to withstand harsh environmental conditions.
-Gain: 15 Db
Mediabridge Coaxial Digital Audio Video Cable

Need coax?

Antennas Direct CDA4 4-Way Output TV/CATV Distribution Amplifier

>>
-Split your signal between 4 TV's or receivers
-For clearer reception
-No worries that splitting the signal will impact picture clarity
-Lifetime Warranty
>>

Channel Master CM 3412 2-Port Ultra Mini Distribution Amplifier for cable and antenna signals

-2-way digital distribution amplifier
-11.5dB gain per output
-AC/DC power supply included
4 and 8 port also available
>>

36 db High Performance VHF / UHF / FM / HDTV Signal Amplifier

-36db gain designed for use in medium to large distribution systems amplifying signals from 40MHz to 900MHz
-amplifies indoor or outdoor TV and HDTV antenna signals for best reception
-adjustable gain control
Looking for more information about:  Free TV, OTA Broadcast, Internet TV, Cable TV, Satellite TV, TV Signals, Digital TV, HDTV, TV Antennas, TV Antenna Rotors, TV Antenna Amplifiers?  Check out the next page>>
Page7/8
NEXT>>>
>>

F Type 75 Ohm Terminator

Also known as Dummy Loads, terminators are an essential component in the proper termination of unused outputs of line splitters and amplifiers which utilize a Type F interface.
     During a channel scan, sometimes your TV tuner will reject a weak signal that flashes on your screen (then disappears).  So you know a signal is reaching your antenna, but it is "too weak" to maintain quality reception (digital signals cannot be fine tuned).
A preamplifier may help strengthen that signal. 

Weak Signal

Preamplifier

Sponsored Links
     A preamplifier (or preamp) is used for weak to moderate signal areas to allow a weak signal that is present at the antenna to be amplified to a viewable strength.   A preamp is designed to be installed at the beginning of a long coax run or before a  splitter in order to offset loss in the coax/splitter.  
     Sometimes when multiple signal splitters are installed, you may need both a preamplifier and a distribution amplifier depending on what it takes to maintain a good signal.
     Check out the noise figure and dB gain of the amplifier.  The proper signal amplification is determined by computing the signal loss that will occur getting the signal from the antenna to the TV.   Match the dB gain of the amplifier to accommodate your antenna system to select the correct amplifier. 
     Use a distribution amplifier (not a preamp) in strong signal areas when you want to divide the signal to several TVs in your house. 
Noise Figure
Signal Loss
Match
Distribution Amplifier

See SAMPLES below